
Shelly Neo Water Valve: $499 leak shut-off, HA caveats
- News
Andrea Roques- Maison connectee
- Published
Shelly started selling its Neo Smart Water Valve in North America on Wednesday, November 18, 2026. It is a 1-inch brass shut-off valve for the main water line that closes in about 12 seconds when a Shelly Flood Gen4 or Flood S Gen4 sensor detects water. List price: $499.99. On launch week, Shelly's US store already shows it at $449.99 with a Black Friday discount.
For Home Assistant users, the box says "Works with Home Assistant" and lists local control over MQTT, webhooks, REST and UDP. The fine print matters more: on November 19, the model number (NAS-WV02W) was not yet in the device list of the Python library behind Home Assistant's Shelly integration. Plan for MQTT until that changes.
We have not had this valve in hand. This is an analysis of Shelly's product pages, knowledge base and launch coverage, not a test, so there is no rating.
Key takeaways
- US launch on November 18, 2026, at $499.99 MSRP ($449.99 on us.shelly.com during Black Friday). Amazon and Best Buy are "coming soon".
- Same hardware has been on Shelly's EU store since at least April 2026: €308.90, or €278.01 on sale as of November 19.
- Closes in 12 s, measures flow, pressure and temperature with ultrasonic sensors, IPX7, cold water only.
- No internal battery: it needs 5 V / 2 A all the time. Shelly says a power bank works.
- Home Assistant: MQTT is the safe route today. Native Shelly integration support is not confirmed yet.
A Shelly-branded valve that Shelly did not build
The Neo valve carries the "Powered by Shelly" badge. That label means a partner device with Shelly's ShellyX chip inside, so it joins the Shelly Smart Control app like any Shelly relay.
The manufacturer is NEO Smart Technology (GuangDong) Co., based in Huizhou, according to Shelly's knowledge base page. Shelly Europe is listed as the importer. Shelly's KB also lists a second Powered by Shelly valve from Frankever, so this is a category the company is building out with partners rather than a one-off.
Why it matters: Shelly already sold leak sensors that could beep and notify. Until now, closing the water main from a Shelly alert meant buying a valve from another brand and gluing the two together yourself. The Neo valve closes that loop inside one app.
What the valve does, spec by spec
The headline feature is the automatic shut-off. The second one is easier to miss: an ultrasonic measurement block with no moving parts that reports flow rate, total consumption, pressure and water temperature.
| Spec (Shelly) | Neo Smart Water Valve NAS-WV02W | What it means at home |
|---|---|---|
| Open / close time | 12 seconds | Quick, but a burst pipe still leaks during those seconds |
| Pipe size | DN25 / 1 inch; US kit with 1" NPT fittings, EU kit with G 1-1/4 BSPP thread and a DN25 (G1) adapter | Check your main line before buying; a 3/4-inch model is planned for 2027 |
| Pressure | 0–200 psi (0–1,379 kPa), ±1 kPa | Lets you watch for pressure spikes that can damage pipes and appliances |
| Flow volume accuracy | ±0.1 gal (0.38 L) | Useful for daily consumption, not for a single slow drip (see below) |
| Water temperature | −10 to 65 °C, ±0.5 °C | Cold supply line only; Shelly says hot water skews readings |
| Power | DC 5 V / 2 A, 800 mA max, 0.3 W standby | Must stay plugged in; no battery inside |
| Radio | Wi-Fi 2.4 and 5 GHz, Bluetooth 5.0 | No Zigbee, Thread or Matter listed |
| Protection | IPX7, NSF-certified brass body | Can sit in a flooded basement; safe for drinking water |
| Size | 195 × 78 × 102 mm (7.7 × 3.1 × 4 in) | Measure the free space on your pipe first |
Two lines from Shelly's own FAQ are worth reading before you plan automations.
First, at very low consumption the flow reading resets to zero, because the flow does not reach the measurement threshold. A dripping tap or a slow toilet leak can stay invisible to the valve. Leak sensors on the floor are still the first line of defense.
Second, with no water moving, the valve shows absolute pressure, around 1 bar. You subtract local atmospheric pressure to get the real line pressure. Any Home Assistant alert on pressure has to account for that offset.
$499.99 in the US, €278 in Europe: the price gap
The same model number has been listed on Shelly's EU store since at least April 2026, according to the Internet Archive. What is new on November 18 is the North American launch, with US plumbing fittings and the Flood Gen4 pairing pushed front and center.
The price difference is hard to ignore. Shelly USA lists $499.99 (on sale at $449.99). The EU store shows €308.90, discounted to €278.01 on November 19. T3 reports £295.90 in the UK. Taxes explain part of it: US prices exclude sales tax while EU prices include VAT. That makes the US price the steeper one.
Here is what a basic kit costs from Shelly's own stores, checked on November 19, 2026. Installation is extra in every case.
| Kit | US list price | US Black Friday price | EU list price | EU sale price |
|---|---|---|---|---|
| Valve + 1 Flood S Gen4 | $527.98 | $472.38 | €327.80 | €295.02 |
| Valve + 3 Flood S Gen4 + 1 Flood Gen4 (cable) | $623.95 | $547.15 | €400.50 | €355.22 |
Unit prices used: valve $499.99 / €308.90, Flood S Gen4 $27.99 / €18.90, Flood Gen4 $39.99 / €34.90 (sale: $449.99, $22.39, $29.99 in the US; €278.01, €17.01, €26.18 in the EU).
The two sensors are not interchangeable. The Flood S Gen4 is a flat puck with steel pads, IP67, a CR123A battery rated for up to two years, and Wi-Fi 6, Bluetooth, Zigbee 3.0 and Matter over Wi-Fi. The Flood Gen4 adds a sensing cable that detects water along its whole length, extendable to 150 m: the right pick for a water heater pan or a long run of pipe.
Home Assistant: what works on day one, and what to check
Shelly's US page promises "Works with Home Assistant". We checked what that means in practice.
Home Assistant's Shelly integration talks to Shelly devices locally. It relies on the aioshelly library, whose device list includes the Flood Gen4 (S4SN-0071A) and Flood S Gen4 (S4SN-0071Z). On November 19, 2026, it had no entry for NAS-WV02W. The library was updated on November 18, so support may land soon. We cannot tell you today which entities, if any, the integration would create for the valve's flow and pressure sensors.
So the order we suggest is simple.
- Try discovery first. If Home Assistant offers the valve in the Shelly integration, check that you get a valve entity plus flow, pressure and temperature sensors. Do not assume.
- Fall back to MQTT. Shelly lists MQTT, REST, webhooks and UDP on the US page, and MQTT on the EU page. Point the valve at your broker and use Home Assistant's MQTT integration. You will map topics by hand, which is more work but fully local.
- Keep the sensors in the Shelly integration. The Flood Gen4 and Flood S Gen4 are already supported, so your leak events arrive in Home Assistant either way.
Where the shut-off logic should live
This is the design question that matters most. If the only path from sensor to valve is "sensor, then Home Assistant, then valve", your water main depends on your HA server being up.
Shelly says its Flood sensors support local automation actions "for independent operation". Shelly's launch material does not say whether the Flood-to-valve pairing runs device to device, through the cloud, or both. The test is easy once installed: unplug your internet, wet a sensor, and see if the valve closes.
Our recommendation: let Shelly handle the emergency close directly, and use Home Assistant for everything around it. That means notifications, a dashboard, and smarter rules.
A minimal HA automation, once the valve exposes a valve entity, looks like this. The entity IDs below are placeholders, not names the integration is confirmed to create:
automation:
- alias: "Leak detected: close main water"
triggers:
- trigger: state
entity_id: binary_sensor.kitchen_flood
to: "on"
actions:
- action: valve.close_valve
target:
entity_id: valve.main_water
- action: notify.mobile_app_phone
data:
message: "Leak under the kitchen sink. Main water closed."
The more interesting rule uses the flow sensor. Water flowing for 60 minutes straight at 3 a.m. is rarely normal. That alert catches a running toilet or a leak behind a wall where no sensor sits. It only works once flow data reaches Home Assistant, through the integration or MQTT.
Plan for power cuts
The valve has no battery. During an outage, it does nothing until power returns, and your Wi-Fi router is probably down too. Shelly lets you define the valve's state after power is restored, and says a 5 V / 2 A power bank can feed it.
The sturdier setup puts the valve, the router and the HA box on a small UPS.
Who is it for
Worth a look if: you own a house with an accessible 1-inch main line, a vacation home or a rental where a leak can run for days, or you already use Shelly gear and want one app for sensors and shut-off. The consumption and pressure data is a real bonus if you track water the way you track electricity with smart plugs.
Wait if: your main line is 3/4 inch (the smaller model is due in 2027), you want native Home Assistant entities without touching MQTT, or you rent and cannot change plumbing. In the US, the EU-versus-US price gap also argues for waiting for Amazon and Best Buy pricing.
Buyer feedback is thin so far. The EU product page shows an average of 4.0 out of 5 from 19 reviews on November 19; we have not verified them and they predate the US launch.
If you are new to local control, start with our Home Assistant guide. Our flashed Wi-Fi switch test shows what a fully local Wi-Fi device looks like in HA. Before you add safety-critical automations, set up backups you have actually restored once. For radio choices around your sensors, see our Zigbee vs Matter/Thread comparison.
FAQ
How much does the Shelly Neo Smart Water Valve cost?
$499.99 MSRP in the US ($449.99 on Shelly's US store during Black Friday, November 2026). In Europe, €308.90 list or €278.01 on sale on Shelly's EU store; £295.90 in the UK according to T3.
Does the Shelly Neo valve work with Home Assistant?
Shelly says yes and lists MQTT, webhooks and REST for local control. As of November 19, 2026, the valve's model (NAS-WV02W) was not in the aioshelly device list used by Home Assistant's Shelly integration, so MQTT is the documented route for now.
Does the valve keep working during a power outage?
Not on its own: it has no battery and needs 5 V / 2 A. Shelly says a 5 V / 2 A power bank can power it, and you can set how it behaves when power comes back.
Can it detect a slow drip on its own?
Probably not. Shelly's FAQ says very low flows below the measurement threshold read as zero. Floor sensors such as the Flood S Gen4 remain necessary.
Sources
- Shelly USA, Neo Smart Water Valve product page, price checked November 19, 2026
- Shelly EU store, Neo Smart Water Valve, price and reviews checked November 19, 2026
- Shelly Knowledge Base, Neo smart water valve (specs, FAQ, manufacturer)
- Shelly Knowledge Base, Flood S Gen4 and Flood Gen4
- CE Pro, November 18, 2026
- rAVe [PUBS], November 18, 2026
- The Verge, November 18, 2026
- T3, UK pricing
- Home Assistant, Shelly integration and MQTT integration
- aioshelly device list on GitHub, checked November 19, 2026
By Andrea R., based on Shelly's official pages, Home Assistant documentation and the coverage cited above. See also how we test.
Disclosure: Rocks on Galaxy has no commercial relationship with Shelly for this article and has not tested this valve. This is a sourced news analysis, not a hands-on review, with no rating and no affiliate links. Hero image: official Shelly product photo from us.shelly.com, cropped and resized, otherwise unedited. Prices and support status checked on November 19, 2026.
Tags :
- Shelly
- Water leak
- Smart valve
- Home Assistant
- MQTT
Share :





