
Aqara Floor Lamp T1 and LED Strip T2: Matter, HA, prices
- News
Andrea R.- Maison connectee
- Published
Aqara put six new smart lights on sale worldwide on Tuesday, November 17, 2026: the Floor Lamp T1, the LED Strip T2, the LED Downlight T2, the LED Bulb T2 in E12/E14, and two outdoor models, the Outdoor String Lights H1 and the Permanent Outdoor Lights H1. Every one of them runs on either Thread or Zigbee. In Thread mode they are native Matter lights, so Home Assistant can add them without an Aqara hub. The catch: Aqara keeps its segment effects and other "Aqara-specific" features for its own hubs.
Prices start at $23.99 in the US and €25.99 on Amazon France. The Floor Lamp T1, the product most people will look at first, costs $119.99 in the US and €99.99 on Aqara's EU store (€114.99 on Amazon France on launch day).
We have not had any of these lights in hand. This is an analysis based on Aqara's official launch post, its product pages and the press release, cross-checked against US and French coverage.
Six lights, two radios, one shared idea
All six were first shown at IFA in Berlin in September. What changed on November 17 is availability: Aqara's own stores, Amazon in eleven countries (US, Canada, UK, France, Germany, Italy, Spain and others), and authorized retailers, according to the press release on Business Wire.
The shared idea is the dual radio. Most RGB floor lamps and strips at this price use Wi-Fi. Aqara chose the two low-power mesh protocols instead, and lets you pick one at setup.
| Product | What it is | Key specs (Aqara) | US price | France price (Nov 17–18) |
|---|---|---|---|---|
| Floor Lamp T1 | 1,420 mm wall-washing light bar | 18 zones, up to 1,000 lm, 24 W, 2,000–9,000 K + RGB | $119.99 | €99.99 (Aqara EU store), €114.99 (Amazon) |
| LED Strip T2 | Cuttable accent strip, 3 / 5 / 10 m | 108 LEDs/m, 18 zones per 3 m, up to 1,750 lm, 24 W at every length | From $66 (10 ft) | €65.99 / €89.99 / €145.99 |
| LED Downlight T2 | Ultra-thin recessed light, 4 or 6 in | Up to 1,200 lm (780 lm for the 4 in model sold in France), CRI over 90 | About $50 | €43.99 (CCT), €46.99 (RGB CCT) |
| LED Bulb T2 E12/E14 | Small-base bulb for sconces, chandeliers | CCT or RGB CCT; 450 lm announced for E14 | About $24 (E12) | €25.99 (CCT), €26.99 (RGB CCT) |
| Outdoor String Lights H1 | Festoon-style string, IP65 | Up to 40 lm per bulb, 2,000–9,000 K, −20 to 40 °C | $130 (50 ft), $220 (100 ft) | €119.99 (15 m), €179.99 (30 m) |
| Permanent Outdoor Lights H1 | Roofline pods, cuttable and extendable | Up to 50 lm per pod, IP65, −20 to 40 °C | From $190 (50 ft) | €189.99 / €319.99 / €479.99 (15 / 30 / 45 m) |
US prices come from MacRumors and The Verge; French prices from iGeneration and UX-Tech on launch day. Retail prices move fast in November, so treat these as launch references.
What 24 W buys you on the floor lamp
Aqara rates the Floor Lamp T1 at 24 W for up to 1,000 lumens of indirect light. That is fill light bounced off a wall, not a reading lamp. The format is crowded, from Govee to Philips Hue. Aqara's angle is the radio choice, not the shape.
Key takeaways
- Nov 17, 2026: six Aqara lights go on sale globally, all with Thread and Zigbee.
- Thread mode = native Matter: Home Assistant, Apple Home, Google Home, Alexa, SmartThings and Homey, no Aqara hub needed.
- Zigbee mode goes through an Aqara hub (M3, M100, M200, G350, G410 or G5 Pro on firmware 4.5.8.0 or later).
- Segment effects, AI scenes and music sync are Aqara-app features; over Matter, plan on a standard color light.
- As of Nov 18, Zigbee2MQTT lists the older LED Strip T1 but none of the six new models.
Home Assistant compatibility: pick your route before you pair
Aqara's footnotes are short but clear. Matter over Thread needs "a Matter Controller of this ecosystem and a Thread Border Router". Aqara-specific features need "a compatible Aqara hub" on firmware V4.5.8.0 or later. Both lines appear on the Floor Lamp T1 page and the LED Strip T2 page.
That gives three realistic setups.
| Route | What you need | What Home Assistant should see | Status on Nov 18 |
|---|---|---|---|
| Matter over Thread | HA Matter integration + a Thread border router | A light entity: on/off, brightness, color, white temperature | Officially supported by Aqara (HA is named) |
| Zigbee via an Aqara hub | Aqara hub on firmware 4.5.8.0+ | Depends on how the hub exposes the light to HA | Needed for Aqara's segment and scene features |
| Zigbee direct (ZHA or Zigbee2MQTT) | Your own Zigbee coordinator | Unknown until converters exist | Not listed in Zigbee2MQTT's Aqara device file yet |
Already running Home Assistant with a Thread radio
This is the cleanest path. With a Home Assistant Connect ZBT dongle or another Thread border router, you commission the lamp from the Companion app like any Matter light. No cloud account, no Aqara hub.
Expect one light entity per device. Matter's lighting device types handle on/off, dimming, color and color temperature; Aqara does not promise per-zone control outside its own app, and lists segment control among the features that need its hub. Eighteen zones on a floor lamp will most likely look like one color in Home Assistant.
Living in Apple Home
Apple users get one extra: Adaptive Lighting, which shifts white temperature through the day. Aqara says it needs a "Thread-enabled Apple home hub", meaning a HomePod mini, a HomePod or an Apple TV 4K with Thread, as MacRumors spells out. If Home Assistant shares the same Thread network, you can add the light to both through Matter multi-admin.
Already deep in Aqara
If you own a Hub M3 or M100 and Aqara sensors, Zigbee mode unlocks the full feature list: segment effects, photo-to-palette, AI scene generation and Aqara automations. With a compatible presence sensor like the FP400, 9to5Mac notes that Aqara also pitches its "Spatial Intelligence" lighting that follows people around a room. The trade-off is a second app and a hub sitting between Home Assistant and the light.
Zigbee2MQTT and ZHA: wait
Our check on November 18: the Aqara device file in the zigbee-herdsman-converters repository (the library behind Zigbee2MQTT) includes the LED Strip T1, but nothing matching the Floor Lamp T1, LED Strip T2 or the H1 outdoor lights. Pairing directly to your own coordinator may give basic control, or nothing useful, until someone writes support. We would not buy for that route today.
Reports from early users
Aqara ran a community trial before launch, so a few owners have already posted. One tester on the Aqara forum writes that he "had a few challenges with the Matter profile" and switched to Zigbee. The switch from Thread to Zigbee "took quite a while", about 20 minutes, before the lamp paired with his Hub M3.
That is one person's report, not a pattern. It does suggest one practical rule: decide on the protocol before mounting anything, because changing it later costs a firmware swap.
iGeneration's reviewer, who received a Floor Lamp T1 from Aqara, also notes the price sits above most rivals in the category.
Who is it for
Worth a look if you run Home Assistant or Apple Home with a Thread border router and want ambient light that stays off Wi-Fi. The LED Strip T2 looks like the easiest entry point at €65.99 for 3 m. One detail to keep in mind: Aqara rates all three lengths at the same 24 W, so a 10 m run spreads the same power over more strip.
Also a fit if you already own an Aqara hub and sensors, and want the effects and presence-driven scenes in Aqara Home.
Skip for now if you want every one of the 18 zones as separate entities in Home Assistant, or you only run Zigbee2MQTT. Support may come; it is not there on day two.
The outdoor H1 pair is the oddest fit for Home Assistant. Their whole appeal is animated effects and AI scene generation, the features most tied to Aqara's app. Bought for Home Assistant alone, they become expensive white-and-color string lights.
FAQ
Does the Aqara Floor Lamp T1 work with Home Assistant?
Yes. In Thread mode it is a Matter device, and Aqara lists Home Assistant among the supported platforms. You need a Thread border router. Expect a single light entity rather than 18 controllable zones.
Do I need an Aqara hub for the LED Strip T2?
Not for Matter over Thread. You do for Zigbee mode and for Aqara-specific features like segment effects; Aqara lists the Hub M3, M100, M200 and Camera Hubs G350, G410 and G5 Pro, on firmware 4.5.8.0 or later.
Can I pair the new Aqara lights with Zigbee2MQTT?
Not officially on November 18, 2026. The Zigbee2MQTT converter library lists the earlier LED Strip T1 but none of the six new lights.
How much does the Aqara Floor Lamp T1 cost?
$119.99 in the US. In Europe it is €99.99 on Aqara's EU store and was €114.99 on Amazon France at launch.
What is the difference between LED Strip T1 and T2?
According to iGeneration, which has used the T1 for three years, the T2 adds Matter over Thread next to Zigbee, a wider white range (2,000–9,000 K), smoother color transitions and more lengths (3, 5 and 10 m).
Planning a Thread network first? Our Matter & Thread guide covers border routers, and our analysis of a Zigbee vs Thread lab study explains how the two radios behave. Aqara's dual-mode logic is the same as on the Outdoor Plug H2 EU. For presence-driven lighting, see our mmWave presence sensor guide; Apple users can start with our Apple Home 2026 guide. Homey owners: Homey is on Aqara's Matter list, and our Homey Pro review covers its Matter support.
Sources
- Aqara Forum, official launch post, November 17, 2026
- Aqara press release, Business Wire, November 17, 2026
- Aqara, Floor Lamp T1 product page and LED Strip T2 product page
- Aqara EU store, Floor Lamp T1
- Home Assistant, Matter integration and Thread integration
- zigbee-herdsman-converters, Aqara (lumi) device file, checked November 18, 2026
- MacRumors, November 17, 2026
- The Verge, November 18, 2026
- iGeneration, November 17, 2026 (French)
- UX-Tech, French prices, November 18, 2026 (French)
- Matter Devices, November 2026
- Aqara Forum, user first impressions of the Floor Lamp T1, November 17, 2026
By Andrea R., based on Aqara's official announcement and product pages, Home Assistant documentation and the coverage cited above. See also how we test.
Disclosure: Rocks on Galaxy has no commercial relationship with Aqara for this article and has not tested these lights. This is a sourced news analysis, not a hands-on review, with no rating and no affiliate links. Hero image: official Aqara lineup visual from the Aqara Forum launch post, resized, otherwise unedited. Prices and support status checked on November 18, 2026.
Tags :
- Aqara
- Matter
- Thread
- Zigbee
- Home Assistant
- Smart lighting
Share :





