
SwitchBot Hub 4: Kata voice, Matter bridge and the HA catch
- News
Andrea R.- Maison connectee
- Published
The short answer: SwitchBot announced the Hub 4 on Monday, 16 November 2026, and it goes on sale the same day for $119.99 / €129.99 / £129.99. It keeps what made the Hub 3 useful (infrared blaster, Matter bridge for up to 30 devices, dial and scene buttons) and adds a microphone pair, a 2.8-inch color screen and a voice assistant called Kata. For Home Assistant users, the voice part changes little. Kata runs through the cloud, and Home Assistant does not list the Hub 4 in its SwitchBot integrations yet.
The announcement went out on PR Newswire from Tokyo at 07:33 ET (13:33 Paris time). The product is live on the US SwitchBot store at $119.98 and on the EU store at €129.98 when we checked on 16 November. German site simon42 had the European press text on 11 November, after an Amazon listing leaked in late October.
We have not had a Hub 4 in hand. This is a sourced analysis, not a review, so there is no rating.
Key takeaways
- Price: $119.99 in the US, €129.99 in Europe, on SwitchBot's site and Amazon from 16 November 2026. That is the Hub 3's launch price.
- New: "Hello Kata" voice control with two microphones (about 3 m pickup), a 2.8-inch color display and a 2 W speaker.
- Kept: IR control for 101,000+ appliance models, Matter bridge for up to 30 sub-devices, four scene buttons and a rotary dial.
- Kata sends your voice to third-party cloud services, according to SwitchBot's voice privacy policy as reported by simon42.
- Home Assistant: no Hub 4 entry in the SwitchBot integrations yet. The Matter bridge is the realistic local route.
- Hub 3 owners who use Home Assistant gain almost nothing by switching.
Hub 4 vs Hub 3: same price, one big addition
SwitchBot did not raise the price. It added hardware.
The Hub 3 already had the dial, the four shortcut buttons, the IR blaster and a 30-device Matter bridge. What it lacked was a way to talk to it. The Hub 4 fixes that, and SwitchBot says the screen is 17% larger and the speaker twice as powerful as on the previous generation. Here is how the two compare on paper.
| Spec | SwitchBot Hub 4 (Nov 2026) | SwitchBot Hub 3 |
|---|---|---|
| US / EU price | $119.99 / €129.99 | $119.99 / €129.99 (launch price) |
| Voice assistant | Yes, "Hello Kata", 2 mics, ~3 m wake | No microphone |
| Display | 2.8-inch color, 17% larger than previous gen | Smaller display |
| Speaker | 2 W (2× previous gen) | Alert sounds, alarm clock |
| Physical controls | 4 scene buttons + rotary dial | 4 scene buttons + dial |
| Infrared | 101,000+ appliance models, works offline once matched | Yes (ACs, TVs, fans) |
| Matter bridge | Up to 30 sub-devices (3 used by the hub's own sensors) | Up to 30 sub-devices |
| Built-in sensors | Motion, temperature, humidity | Motion, temperature, humidity, light |
| Connectivity / power | 2.4 GHz Wi-Fi, Bluetooth, USB-C 5 V/2 A adapter included | 2.4 GHz Wi-Fi, Bluetooth LE, 5 V/2 A adapter |
| Home Assistant (official docs) | Not listed yet | Sensor data only, no device control through the hub |
Hub 4 figures come from the press release and SwitchBot's product page. Hub 3 figures come from its own product page and the Home Assistant docs.
What Kata does, and where it stops
Kata is a command layer on top of the SwitchBot app.
You can ask it to turn on a specific device ("Hello Kata, turn on the AC"), act on several devices in one sentence, or run a scene you already built in the app, such as Movie Night or Away. It can also read out the hub's temperature and humidity, CO₂ from a compatible Meter, the state of supported locks and sensors, and battery levels. The screen shows the answer while Kata speaks.
Two limits matter. First, Kata does not create automations: SwitchBot's release says plainly that "automation creation and management remain in the app." Second, it is not offline. The press release's own footnote reads: "Local infrared control does not imply offline Kata voice operation." Your IR commands keep working when the internet drops. Your voice commands do not.
Privacy is the bigger question. According to simon42, which read SwitchBot's Japanese-language privacy policy for the Hub 4 voice feature, audio goes to a third-party cloud speech recognizer, and the resulting text then goes to a third-party large language model. The recording is deleted after conversion, and a history is kept only if you opt in, for up to 30 days. SwitchBot has not named those providers in the documents we read.
That puts Kata in the same family as Alexa or Google Assistant, with a dial on the front. If you want voice commands that never leave the house, Home Assistant's local pipeline is the alternative, and our local voice hardware guide covers what each machine can run.
Three ways into Home Assistant, and which one to pick
Home Assistant users will ask one thing: can I control it locally? Today, partly.
| Route | Local? | What you get today | Catch |
|---|---|---|---|
| Matter bridge (Hub 4 paired to HA's Matter integration) | Yes | Supported SwitchBot devices behind the hub, plus the hub's motion, temperature and humidity entries | Not every device type crosses Matter. HA's docs give the Hub 2 example: curtains, locks and blinds yes, lights no |
| SwitchBot Cloud integration | No (cloud polling) | IR appliances: on/off, plus temperature and mode for ACs. Hub 3 sensor data | Hub 4 not listed yet. 10-minute polling, 10,000 API calls a day, IR state is guessed from past commands |
| SwitchBot Bluetooth integration | Yes (local push) | Hub 3 sensor data over Bluetooth | Hub 4 not listed yet. No device control through the hub |
The Home Assistant Matter documentation names SwitchBot hubs as an example of a Matter bridge, and adds a warning: "There is no guarantee that all the devices from that ecosystem can be used in Home Assistant." The SwitchBot Cloud integration page lists Hub 2 and Hub 3 with "currently only supports retrieving sensor data, does not yet support device control." The Bluetooth integration says the same for the Hub 3. Neither mentions the Hub 4 as of 16 November.
Our take: start with Matter, keep the cloud for IR
If we were setting one up next to Home Assistant, we would pair it over Matter first, because that path stays on your network and it is the integration SwitchBot advertises on the product page. The Hub 4 then becomes a 30-slot bridge plus a thermometer and a motion sensor. For IR air conditioners and TVs, the SwitchBot Cloud integration is still the practical way to get them into automations, with the guessed-state caveat. One Hub 3 buyer on SwitchBot's store describes adding that hub to Home Assistant over Matter by pasting the pairing code; that is a customer review, not our test, and it concerns the Hub 3.
Kata itself does not come along. It answers to the SwitchBot app, not to Home Assistant's Assist. If your household lives in Home Assistant dashboards, the voice assistant is a side feature you may simply leave off.
Our Matter and Thread guide explains bridges versus native devices if the difference is fuzzy. For a full hub that also speaks Zigbee, Z-Wave and Thread, Andrea's Homey Pro test and the Homey Pro vs Home Assistant decision guide are a better starting point. The Hub 4 is a bridge and a remote, not a controller.
Who should buy it
A good fit if you already own several SwitchBot devices (curtains, locks, bots, meters), you use Apple Home, Google Home or Alexa, and you have IR-only gear like a split AC or an older TV. You get one box for voice, IR and Matter at the price the Hub 3 cost.
Skip it if you own a Hub 3 and Home Assistant runs your house. Same bridge, same IR, same dial; the new part is a cloud assistant HA will not use. Also skip it if you refuse cloud voice processing.
Wait if you are a Home Assistant user buying your first SwitchBot hub. The Hub 3 is still sold and does the HA-relevant jobs. Give the Hub 4 a few weeks for integration support and first owner reports.
FAQ
Does the SwitchBot Hub 4 work without internet?
Partly. SwitchBot says matched IR controls keep working locally without an internet connection. Kata voice control does not: the release states that local IR "does not imply offline Kata voice operation."
Is the Hub 4 a Thread border router?
SwitchBot does not say so. The release and product page list 2.4 GHz Wi-Fi and Bluetooth, plus Matter Bridge support. A bridge exposes SwitchBot devices to Matter controllers; it is not the same as a Thread border router.
Can Home Assistant control devices through the Hub 4?
Through Matter, supported SwitchBot devices behind the hub can appear in Home Assistant. The SwitchBot Cloud and Bluetooth integrations do not list the Hub 4 yet, and for Hub 3 they only read sensor data.
Should I upgrade from a Hub 3?
Only if you want Kata and the bigger screen. The bridge capacity (30 devices), IR support, dial and buttons are the same on paper.
Sources
- SwitchBot press release, PR Newswire, 16 November 2026
- SwitchBot Hub 4 product page (US) and EU store, checked 16 November 2026
- SwitchBot Hub 3 product page
- simon42, 11 November 2026 (European pricing, voice privacy policy)
- Home Assistant: Matter integration, SwitchBot Cloud and SwitchBot Bluetooth
- Connected Acre, product overview
Byline: Andrea R., based on SwitchBot's press release and product pages, Home Assistant's official documentation and reporting by simon42 and Connected Acre. See also our Home Assistant guide and how we test.
Disclosure: Rocks on Galaxy has no affiliation with SwitchBot and has not received or tested a Hub 4. This article is a sourced news analysis, not a hands-on review, and contains no commission links. Hero image: official SwitchBot Hub 4 press image distributed via PR Newswire, cropped to remove white borders, otherwise unedited. Prices checked on 16 November 2026.
Tags :
- SwitchBot
- Hub 4
- Matter
- Home Assistant
- Infrared
Share :


